CANROYAL INDUSTRIAL GEAR OIL SAE 80W

General Information
TYPICAL PROPERTIES

CANROYAL INDUSTRIAL GEAR OIL SAE 80W

DESCRIPTION

CANROYAL INDUSTRIAL GEAR OIL SAE 80W is a range of premium mineral manual gear oil manufactured with modern extreme pressure additives and friction modifiers, meeting the requirements of API GL-4/5 and MT-1, as well as many other manufacturer specifications. It contains the correct dosage of limited-slip additive eliminating the need for an additional product when used in limited slip differentials. Through their mono-grade and multi- grade viscosity characteristics they meet the requirements of several automotive manufacturers for passenger cars and commercial trucks or buses.

APPLICATIONS

CANROYAL INDUSTRIAL GEAR OIL SAE 80W are designed for use in differentials, both hypoid and limited slip, manual gearboxes, transfer cases and transaxles in passenger cars, light commercials, 4WDs, trucks, construction, earthmoving and agricultural equipment, where this viscosity grade is required.

Properties

CANROYAL INDUSTRIAL GEAR OIL SAE 80W provides a superior level of protection in heavy duty conditions including shock loads, preventing wear and maintaining the life of critical parts. The multi-purpose formulation allows greater flexibility while minimizing inventory levels, especially for differential applications.

Product Benefits

Anti-shudder additive technology
Superior thermal stability
Longer drain intervals
Compatible with all seal and metal types

High safety margin against foaming and corrosion
Superior protection against scoring & spilling wear
Maintains cleanliness & reduces abrasive wear
Very good wear protection, even under severe load conditions.

Recommendations / Specifications

API GL-4/GL-5/MT-1/PG-2, MIL-L-2105D, L-PRF-2105E, GM HN 1181/1187/1386/1561, China National GB 13895-1992, Ford ESW-M2C1006-B/1013-A/104-A/105-A/197-A, ZF TE-ML 17A, ZF TE-ML 19C.

Meets or exceeds the quality requirements of numerous vehicle manufacturers such as IVECO, MAN, SCANIA and VOLVO for heavy vehicles rear axles and final drive units.

TYPICAL TECHNICAL PROPERTIES

Typical Data	Unit	Test Method	Results
Viscosity Grade		SAE J300	80W
Density at 15⁰C	g/mL	ASTM D4052	0.89
Kinematic Viscosity at 40⁰C	mm²/s	ASTM D445	100.00
Kinematic Viscosity at 100⁰C	mm²/s	ASTM D445	11.51
Viscosity Index	-	ASTM D2270	102
Flash Point	°C	ASTM D92	246
Pour Point	°C	ASTM D97	-27
RBOT,	min	ASTM D2272	1800

Note: These characteristics are typical of current production. While future production will conform to Canroyal’s specification, variations in these characteristics may occur.

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact Office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the Environment.