CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 20W-50

General Information
TYPICAL PROPERTIES

CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 20W-50

DESCRIPTION

CANROYAL SEMI-SYNTHETIC Engine Oil SAE 20W-50 are premium high-performance multi-grade engine oils formulated from high quality base oils combined with Top quality performance additives to help provide long engine life and protect critical engine parts from lubricant related failures for up to 5,000 miles, providing wide temperature range engine protection.

APPLICATIONS

CANROYAL SEMI-SYNTHETIC Engine Oil SAE 20W-50 are suitable for petrol engines fitted with conventional carburetors and formulated to give you confidence of protection beyond that of conventional oils. Particularly recommended for, Latest gasoline engine technologies, Passenger cars, SUV’s, light trucks and vans and Go City Driving, Normal to severe operating conditions.

Properties

CANROYAL SEMI-SYNTHETIC Engine Oil SAE 20W-50 are specially formulated using extra cleaning additive to help protect against sludge and engine deposits. Additionally, pour point depressants and a viscosity index improvers (VII) are included to provide the optimum fluidity and viscosity across a broad range of temperatures & to provide extra protection against the harmful effects of stop-and-go driving and high and low temperature engine operation.

Performance Features and Benefits

Superior engine wear protection
Superior cleansing technology to help stop dirt and sludge build up
Reduced high temperature engine deposits

Can be used in both Diesel & LPG engines
Excellent thermal and oxidation stability
Reduces wear due to advanced base oils
Helps clean and protect older engines

Superior engine protection during start up,

warm-up and normal driving conditions

Long-term wear protection of engine parts (distribution, ring, plunger and liner) increasing engine life.

Meets the most demanding car manufacturer’s requirements
Ensures the important engine seals stay soft and pliable to minimize oil leakage

Recommendations / Specifications

International Standards: , SJ.

ACEA: A3/B3, A3/B4, C3, ILSAC GF-3, JASO SG+, GSO-1785/2013

Meets or exceeds : Opel GM-LL-A/B-025, RN0700, RN0710, MB 229.3/229.1/229.31, Nissan, Toyota,

Fiat 9.55535-N2, BMW LL-01/ LL-04, VW 502.00, Ford WSS-M2C937, Porsche A40.

TYPICAL TECHNICAL PROPERTIES

Typical Data	Unit	Test Method	Results
Viscosity Grade		SAE J300	SAE 20W50
Density at 15⁰C	g/mL	ASTM D4052	0.880
Cold Cranking Viscosity(CCS) at -15⁰C	mPa s	ASTM D5293	7800
Kinematic Viscosity at 40⁰C	mm²/s	ASTM D445	149.15
Kinematic Viscosity at 100⁰C	mm²/s	ASTM D445	18.40
Viscosity Index	-	ASTM D2270	140
Flash Point	°C	ASTM D92	238
Pour Point	°C	ASTM D97	-27
Total Base Number	mg KOH/g	ASTM D2896	7.05

Note: These characteristics are typical of current production. While future production will conform to Canroyal’s specification, variations in these characteristics may occur.

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the