CANROYAL SYNTHETIC HYDRAULIC OILS 100
DESCRIPTION
CANROYAL SYNTHETIC HYDRAULIC OILS are designed to provide excellent wear protection for high-pressure vane, piston and gear pumps in a wide range of temperatures, helping to extend the life of machine components. They also deliver hydraulic efficiency and system cleanliness and durability.
APPLICATIONS
CANROYAL SYNTHETIC HYDRAULIC OILS are suitable for:
- Systems where cold start-up and / or very high operating temperatures are typical
- Where small amounts of water are unavoidable
- In systems containing gears and bearings
- Hydraulic systems prone to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are used
- Systems employing multi-metal component designs
- Hydraulic systems on mobile equipment such as dump trucks, motor graders, bulldozers and forklifts
- High pressure vane, piston and gear pumps
- Systems requiring a high degree of load-carrying capability and anti-wear protection
- Applications where thin oil-film corrosion protection is an asset such as in systems containing moisture
Properties
CANROYAL SYNTHETIC HYDRAULIC OILS are mostly water white and exhibit outstanding low and high temperature performance helping to provide an extra margin of equipment protection above and beyond the capabilities of comparable mineral oil-based products. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.
Product Benefits
- Wide temperature range performance
- Excellent Corrosion Protection
- Outstanding Oxidation Stability
- Clean hydraulic systems
- Exceptional Anti-wear
- High Viscosity Index
- Protects against valve sticking
- Protects against rust and corrosion
|
- Meets a Wide Range of Equipment Requirements
- Very Good Multi-metal Compatibility
- Excellent Air Separation Characteristics
- Controlled Demulsibility
- Helps reduce system deposits and potential sludging
- Long equipment life and lower maintenance costs
- Reduces wear at cold start-up temperatures
|
Recommendations / Specifications
DENISON HF-0, HF-1, HF-2, VICKERS I-286-S, VICKERS M-2950-S, CINCINNATI MILACRON P-68, P-69, P-70
TYPICAL TECHNICAL PROPERTIES
ISO Viscosity Grade
|
32
|
46
|
68
|
100
|
Appearance, Visual
|
B&C
|
B&C
|
B&C
|
B&C
|
Density at 15⁰C, g/ml, ASTM D4052
|
0.852
|
0.851
|
0.854
|
0.858
|
Kinematic Viscosity at 40⁰C, mm²/s, ASTM D445
|
32
|
46
|
68
|
100
|
Kinematic Viscosity at 100⁰C, mm²/s, ASTM D445
|
6.4
|
8.54
|
11.81
|
15.94
|
Viscosity Index, ASTM D2270
|
144
|
154
|
171
|
160
|
Flash Point(COC), °C, ASTM D92
|
234
|
238
|
240
|
244
|
Pour Point, °C, ASTM D97
|
-57
|
-54
|
-54
|
-51
|
Copper Strip Corrosion, ASTM D 130, 3 hours @ 100°C
|
IB
|
IB
|
IB
|
IB
|
Demulsibility, ASTM D 1401, 82°C, minutes to 3ml Emulsion
|
20
|
20
|
20
|
20
|
FZG Gear Test, DIN 51534, Fail Stage
|
11
|
11
|
11
|
11
|
|
|
|
Note: These characteristics are typical of current production. While future production will conform to Canroyal’s specification, variations in these characteristics may occur.
Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the environment.